CANNONDALE

THE NEW MOTERRA SL

The Lightest Full-Power Mountain Bike Ever*

Moterra SL is the first 150mm trail bike to pack 85Nm of torque, 600W+ of peak output, and 601Wh of power into a machine weighing as little as 19.5kg / 43lbs.

*eMTB with drive unit capable of at least 85Nm of torque and battery capacity of at least 600Wh. Full-power fun meets lightweight agility – it’s in a class of its own.


IT WAS A CLASSIC GOLDILOCKS MOMENT.

We had just wrapped up a few days of ride testing a bunch of different e-MTBs, and we were sitting in the lodge, having a beer and sharing notes. The usual banter: all the sends, scrapes, and near misses; what we liked, and didn’t like, and what we’d change about each of the designs – all that post-ride dorkery that always happens after a good session.

As the evening wore on, we began to notice that we had more or less divided ourselves down the middle into two opposing, yet interestingly similar, camps. There were those who liked the giddy power and big range of the heavyweight e-bikes, but wished they were lighter and more agile; and those who preferred the more nimble, playful feel of the lightweight e-bikes, but wished they had more power and range. Some porridge is too hot. Other porridge is too cold. And the two porridges are tough to ride together because they move at different speeds, and thrive with different terrain and riding styles.

The solution was obvious – we needed to create that “just-right” porridge – a mountain bike that delivered the best of both; the power and range of the heavyweights, with the agility and pop of the lightweights. Easy, right? Hardly. There were lots of reasons why an E-MTB like that didn’t exist yet. But with our decades of experience making both superlight mountain bikes, and cutting-edge e-bikes, we knew we could do it. It was time to get cookin’.

Blending weight-saving carbon tech from our Scalpel XC race bikes, suspension kinematics and geo from our rowdy trail bikes, motor and ride tuning experience from our eMTBs, plus some cutting-edge battery technology, we whipped up something truly delicious – the lightest, full-power, full-range mountain bike ever made. The Moterra SL. So Luscious.

The new Cannondale Moterra SL eMTB

OVERVIEW

HIGH ON POWER, LOW ON WEIGHT

Electric mountain bikes with this much power on tap have never been this light. The lightweight carbon fiber frame features our weight-saving FlexPivot technology, and houses a custom battery that packs more watts per kilo than any other on the market. That unmatched power-to-weight ratio makes for one hell of a fun ride.

CATEGORY
Electric | Mountain

WHEEL / TIRE SIZE
(F) 29×2.5″ / (R) 27.5×2.4″

TRAVEL
(F) 160mm, (R) 150mm

DRIVE UNIT
Specially Tuned Shimano EP801

BATTERY
Custom High-Energy Density Internal 601Wh

RANGE
Up to 70km (43mi)

FULL BOOST
Power comes from a custom-tuned version of Shimano’s EP801drive unit – the lightest motor capable of the big power we were looking for. With 85Nm of torque and 600+ watts of max output, it brings big-time boost to the lightweight party.

POWER A LA MODE
We developed custom ride modes for Moterra SL, specially tuned for the kind of high-speed sessions this rig encourages. Four different levels of boost, easily adjustable on the fly, help you choose between maximum range, monstrous power, or your ideal blend of both. Whether mild or wild, your ride will be whatever you want it to be, no more and no less.

HEAVENLY HANDLING
At a glance, it looks kinda crazy – an adjustable head angle slack enough for a DH bike, the long reach and steep seat angle of a modern trail bike, suspension layout and geometry fully customized by size – but when it all comes together, it absolutely rips.

ANIMATED SUSPENSION
More than just weight-savers, our burly FlexPivot stays are also at the heart of our suspension design. By acting as a Horst pivot, it creates a true four-bar system, allowing our engineers to dial in the perfect suspension response for every input. The result? Incredible traction, confident braking, and a playful feel that just begs to be pushed harder.

The new Cannondale Moterra SL eMTB

FEATURES

Shimano EP801 Drive Unit
Shimano’s top-shelf e-MTB system: lightweight, reliable, and powerful. 85Nm of torque and 600 watts of max power, delivered via custom-engineered ride modes for full-power fun.

The new Cannondale Moterra SL eMTB

Custom 601Wh Battery
Using special cells that store more power per kilo than ever before, we created an incredibly compact battery that packs a full 601 watt-hours into just 3.1 kg including the wiring harness. All of the power, less of the weight.

The new Cannondale Moterra SL eMTB

Custom-Tuned Ride Modes
Specially designed assist modes for the perfect ride : ECO – max range for all-day exploits. TRAIL – mid-power, great for riding with friends on lightweight e-bikes. BOOST – ramps up the assist for ripping with full-power e-bikes. And TURBO – full power, all the time. Have it your way.

The new Cannondale Moterra SL eMTB

Designed For You
With our Proportional Response design, everything from the suspension layout to the geometry — even the length of the chain stays — is completely customized for each bike’s size. It’s performance, built just for you.

The new Cannondale Moterra SL eMTB

Flip It Your Way
The Flip Chip means you can choose between keeping Moterra Neo SL as a “mullet” bike, with the 29 inch front/27.5-inch-rear wheel setup for agility and playfulness, or if switching to 29-inchers at both ends, for maximum traction and rolling efficiency.

The new Cannondale Moterra SL eMTB

FlexPivot
These carbon flex points are something we pioneered years ago, and they’re like a cheat code in frame engineering. They reduce weight, eliminate maintenance, and they allow us to use a sophisticated four-bar suspension design, increasing your traction and control on the trail.

The new Cannondale Moterra SL eMTB

Route it Right
On the model 1 and 2 bikes you can run internal cables straight through the headset, to keep things looking clean and out of harm’s way, or through ports in the frame, for simplicity and ease of service.

The new Cannondale Moterra SL eMTB

Get Your Head Set
Adjustable headset cups give you a 1.2-degree range of angle adjustment at the front. Dial it back if you want more stability at speed, set it steeper if you want more agility on technical terrain.

The new Cannondale Moterra SL eMTB

Don’t Be Bashful
Like a helmet for your motor, an integrated bashguard protects it from harsh impacts on the trail. You may not need it much, but when you do, you’re happy it’s there.

The new Cannondale Moterra SL eMTB

MODELS

Cannondale Moterra SL Lab71

MOTERRA SL LAB71

MSRP: $14,000 | 13,999 € | £12,500
Weight (Claimed): 19.5kg / 42.9lbs (Medium)

Frame: LAB71 Moterra Neo SL, Series 1 Carbon construction, 150mm travel, Proportional Response Tuned Suspension, FlexPivot Chainstay
Fork: Fox Float Factory 36 Grip2 | 160mm
Headset: Acros Adjustable Angle (1.2°)
Shock: Fox Float X Factory, 2 pos adj, EVOL LV

E-SYSTEM
Drive Unit: Shimano EP801, 85Nm | Custom Tuned
Battery: Custom 601Wh battery
Display: Shimano SC-EM800 Cycle Computer
Charger: Custom 4A

DRIVETRAIN
Derailleur: SRAM XX Eagle AXS, T-Type
Shifters: SRAM AXS Ult Pod Controller
Chain: SRAM XX Eagle, T-Type, Flattop
Crank: e*thirteen e*spec Race Carbon – Gen 4 | 165mm, 34T
Cassette: SRAM XX Eagle, T-Type, 10-52, 12-speed

BRAKES
Brakes: SRAM Code Ultimate Stealth, 200mm HS2 rotors
Brake Levers: SRAM Code Ultimate Stealth

WHEELS
Hubs: DT Swiss 240
Rims: DT Swiss XMC 1501, carbon, 30mm inner width
Spokes: DT Swiss Competition Race
Front Tire: Maxxis DHF, 29×2.5 “, 3C, EXO+
Rear Tire: Maxxis Dissector , 27.5×2.4″, 3C, EXO+

COMPONENTS
Handlebar: OneUp Carbon Ebar | 35mm Rise, 8° sweep, 5° rise, 780mm
Grips: Cannondale TaperRidge
Stem: OneUp Stem, 6061 Alloy, 1-1/8″, 35mm, 0°
Saddle: Fizik Terra Ridon X1 | 145mm
Seatpost: RockShox Reverb AXS | 150mm (S), 170mm (M-XL)

CONNECTIVITY
Wheel Sensor: Cannondale Wheel Sensor

Cannondale Moterra SL 1

MOTERRA SL 1

MSRP: $8,750 | 9,999 € | £8,550
Weight (Claimed): 19.7kg / 43.4lbs (Medium)

Frame: Moterra Neo SL, Series 1 Carbon construction, 150mm travel, Proportional Response Tuned Suspension, FlexPivot Chainstay
Fork: Fox Float Factory 36 Grip2 | 160mm
Headset: Acros Adjustable Angle (1.2°)
Shock: Fox Float X Factory, 2 pos adj, EVOL LV

E-SYSTEM
Drive Unit: Shimano EP801, 85Nm | Custom Tuned
Battery: Custom 601Wh battery
Display: Shimano SC-EM800 Cycle Computer
Charger: Custom 4A

DRIVETRAIN
Derailleur: SRAM X0 Eagle AXS, T-Type
Shifters: SRAM AXS Pod Controller
Chain: SRAM X0 Eagle, T-Type, Flattop
Crank: e*thirteen e*spec Plus | 165mm, 34T
Cassette: SRAM X0 Eagle, T-Type, 10-52, 12-speed

BRAKES
Brakes: SRAM Code Silver Stealth, 200mm HS2 rotors
Brake Levers: SRAM Code Silver Stealth

WHEELS
Hubs: DT Swiss 240
Rims: DT Swiss XM1700, 30mm inner width
Spokes: DT Swiss Competition
Front Tire: Maxxis DHF, 29×2.5 “, 3C, EXO+
Rear Tire: Maxxis Dissector , 27.5×2.4″, 3C, EXO+

COMPONENTS
Handlebar: HollowGram SAVE riser bar | Carbon, 30mm rise, 8° sweep, 5° rise, 780mm
Grips: Cannondale TaperRidge
Stem: Cannondale 1, 7075 Alloy, 1-1/8″, 35mm, 0°
Saddle: Fizik Terra Ridon X3 | 145mm
Seatpost: Cannondale DownLow Dropper | 150mm (S), 170mm (M-XL)

CONNECTIVITY
Wheel Sensor: Cannondale Wheel Sensor

Cannondale Moterra SL 2

MOTERRA SL 2

MSRP:  $7,000 | 7,999 € | £6,550
Weight (Claimed): 20.6kg / 45.4 lbs (Medium)

Frame: Moterra Neo SL, Series 1 Carbon construction, 150mm travel, Proportional Response Tuned Suspension, FlexPivot Chainstay
Fork: Fox Performance 36 Grip | 160mm
Headset: Acros Adjustable Angle (1.2°)
Shock: Fox Float X Performance Elite, 2 pos adj, EVOL LV

E-SYSTEM
Drive Unit: Shimano EP801, 85Nm | Custom Tuned
Battery: Custom 601Wh battery
Display: Shimano SC-EM800 Cycle Computer
Charger: Custom 4A

DRIVETRAIN
Derailleur: Shimano XT
Shifters: Shimano Deore M6100, 12-speed
Chain: Shimano Deore 6100, 12-speed
Crank: e*thirteen e*spec Plus | 165mm, 34T
Cassette: Shimano Deore 6100, 10-51, 12-speed

BRAKES
Brakes: Shimano Deore 6120 4-piston | 180/180mm RT64 rotors
Brake Levers: Shimano Deore

WHEELS
Hubs: Formula (f) / DT Swiss 240 (r)
Rims: Stans Arch MK4, 32H, tubeless ready
Spokes: DT Swiss Champion
Front Tire: Maxxis DHF, 29×2.5 “, 3C, EXO+
Rear Tire: Maxxis Dissector , 27.5×2.4″, 3C, EXO+

COMPONENTS
Handlebar: Cannondale 3 Riser | Alloy, 15mm rise, 8° sweep, 4° rise, 780m
Grips: Cannondale TaperRidge
Stem: Cannondale 1
Saddle: Fizik Terra Ridon X5 | 145mm
Seatpost: Cannondale DownLow Dropper | 150mm (S), 170mm (M-XL)

CONNECTIVITY
Wheel Sensor: Cannondale Wheel Sensor

LEAVE A COMMENT, WIN FREE SWAG!

Want to win some free schwag? Leave a comment and vote up the most thoughtful comments and each month we’ll pick a winner. The person with the smartest and most helpful replies will earn some sweet new gear. Join the Pack and get the latest news and read the latest reviews on the top mountain and electric mountain bikes.